Vintage Commdore Amiga 500 With M - Tec 68020, 1MB Ram And Kickstart 3. 1
Item History & Price
Reference Number: Avaluer:899174 | Model: Amiga 500 |
Brand: Amiga |
Vintage Commdore Amiga 500 with M-Tec 68020, 1MB Ram and Kickstart 3.1
This Commodore Amiga 500 has an M-Tech 68020i accelerator installed (14mhz). It also has a SIMM slot that accepts either a 1 or 4mb SIMM. Currently its installed with 1MB ram. There is also an existing A501 512k ram board in the expansion slot, but I believe this is disabled when the onboard ram is being used. There are also Kickstart 3.1 roms installed. Please see pictures for detai...ls, you are getting the computer, power supply and users manual. The computer appears to be working properly and the disk drive is functioning. It has not been extensively tested however.
The computer condition is OK for its age. There doesn't seem to be extensive deep yellowing. It is missing the side expansion port cover, and it appears the front part of the case by the center screw is a tiny bit loose.
This vintage Commodore Amiga 500 is sold as/is, no exchanges or refunds. Thanks for looking!
Some more information on the M-Tec board (via the Amiga Hardware Database):
M-Tec 68020i
1994
Amiga
A500
Interface
68000 socket
Autoconfig ID
2192 / 6
processor
68020 or 68EC020 @ 14.28 MHz, PGA (synchronous with the Amiga)
optional PLCC or PGA FPU @ 14.28 MHz (synchronous) or more with oscillator (asynchronous)
memory
one 72 pin SIMM socket accepts 1 or 4 MB RAM
maprom can be disabled by jumper
notes
connects to the 68000's socket
the 68000 is replaced onto the board
not compatible with the GVP Impact Series hard disk controller
This Commodore Amiga 500 has an M-Tech 68020i accelerator installed (14mhz). It also has a SIMM slot that accepts either a 1 or 4mb SIMM. Currently its installed with 1MB ram. There is also an existing A501 512k ram board in the expansion slot, but I believe this is disabled when the onboard ram is being used. There are also Kickstart 3.1 roms installed. Please see pictures for detai...ls, you are getting the computer, power supply and users manual. The computer appears to be working properly and the disk drive is functioning. It has not been extensively tested however.
The computer condition is OK for its age. There doesn't seem to be extensive deep yellowing. It is missing the side expansion port cover, and it appears the front part of the case by the center screw is a tiny bit loose.
This vintage Commodore Amiga 500 is sold as/is, no exchanges or refunds. Thanks for looking!
Some more information on the M-Tec board (via the Amiga Hardware Database):
M-Tec 68020i
1994
Amiga
A500
Interface
68000 socket
Autoconfig ID
2192 / 6
processor
68020 or 68EC020 @ 14.28 MHz, PGA (synchronous with the Amiga)
optional PLCC or PGA FPU @ 14.28 MHz (synchronous) or more with oscillator (asynchronous)
memory
one 72 pin SIMM socket accepts 1 or 4 MB RAM
maprom can be disabled by jumper
notes
connects to the 68000's socket
the 68000 is replaced onto the board
not compatible with the GVP Impact Series hard disk controller